Orders Over
$5000Microchip DSPIC33FJ32GP304T-E/PT
Microchip Technology
Brands: Microchip Technology, Inc
Mfr.Part #: DSPIC33FJ32GP304T-E/PT
Datasheet: DSPIC33FJ32GP304T-E/PT Datasheet (PDF)
Package/Case: TQFP-44
Product Type: LED Drivers
RoHS Status:
Stock Condition: 2,600 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
DSPIC33FJ32GP304T-E/PT General Description
•dsPIC33Fs are designed to execute digital filter algorithmsand high-speed precision digital control loops, ideal for applications thatneed to perform under pressure •GeneralPurpose Digital Signal Controllers (DSCs) with advanced analog and seamlessmigration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs
Features
- Operating Range
- Up to 40 MIPS operation (at 3.0-3.6V)
- 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
- 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
- High-Performance dsPIC33FJ core
- Modified Harvard architecture
- C compiler optimized instruction set
- 24-bit wide instructions, 16-bit wide data path
- Linear program memory addressing up to 4M instruction words
- Linear data memory addressing up to 64 Kbytes
- Two 40-bit accumulators with rounding and saturation options
- Indirect, Modulo and Bit-reversed addressing modes
- 16 x 16 fractional/integer multiply operations
- 32/16 and 16/16 divide operations
- Single-cycle multiply and accumulate (MAC) with accumulator write back and dual data fetch
- Single-cycle MUL plus hardware divide
- Up to ±16-bit shifts for up to 40-bit data
- On-chip Flash and SRAM
- Direct Memory Access (DMA)
- 8-channel hardare DMA
- Up to 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA
- Most peripherals support DMA
- Timers/Capture/Compare/PWM
- Up to five 16-bit and up to two 32-bit Timers/Counters
- One timer runs as a Real-Time Clock with an external 32.768 kHz oscillator
- Input Capture (up to four channels) with Capture on up, down or both edges
- 16-bit capture input functions
- 4-deep FIFO on each capture
- Output Compare (up to four channels) with Single or Dual 16-bit Compare mode and 16-bit Glitchless PWM mode
- Hardware Real-Time Clock/Calendar (RTCC)
- Interrupt Controller
- 5-cycle latency
- 118 interrupt vectors
- Up to 49 available interrupt sources
- Up to three external interrups
- Seven programmable priority levels
- Five processor exceptions
- Digital I/O
- Peripheral pin Select functionality
- Up to 35 programmable digital I/O pins
- Wake-up/Interrupt-on-Change for up to 21 pins
- Output pins can drive from 3.0V to 3.6V
- Up to 5V output with open drain configuration
- All digital input pins are 5V tolerant
- 4 mA sink on all I/O pins
- System Management
- Flexible clock options: External, crystal, resonator and internal RC
- Fully integrated Phase-Locked Loop (PLL)
- Extremely low jitter PLL
- Power-up Timer
- Oscillator Start-up Timer/Stabilizer
- Watchdog Timer with its own RC oscillator
- Fail-Safe Clock Monitor
- Reset by multiple sources
- Power Management
- On-chip 2.5V voltage regulator
- Switch between clock sources in real time
- Idle, Sleep, and Doze modes with fast wake-up
- Analog-to-Digital Converters (ADCs)
- 10-bit, 11 Msps or 12-bit, 500 Ksps conversion:
- Two and four simultaneous samples (10-bit ADC)
- Up to 13 input channels with auto-scanning
- Conversion start can be manual or synchronized with one of four trigger sources
- Conversion possible in Sleep mode
- Other Analog Peripherals
- Two analog comparators with programmable input/output configuration
- 4-bit DAC with two ranges for analog comparators
- 16-bit dual channel 100 Ksps audio DAC
- Data Converter Interface (DCI) module
- Codec interface
- Supports I2S and AC.97 protocols
- Up to 16-bit data words, up to 16 words per frame
- 4-word deep TX and RX buffers
- Communication Modules
- 4-wire SPI (up to two modules) with I/O interface to simple codecs
- I2C™ with Full Multi-Master Slave mode support, slave address masking, 7-bit and 10-bit addressing, integrated signal conditioning and bus collision detection
- UART (up to two modules) with LIN bus support, IrDA® and hardware flow control with CTS and RTS
- Parallel Master Slave Port (PMP/EPSP)
- Programmable Cyclic Redundancy Check (CRC)
- Debugger Development Support
- In-circuit and in-application programming
- Two program breakpoints
- Trace and run-time watch
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer: | Microchip | Product Category: | Microchip Technology |
Brand: | Microchip Technology |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products