KS8995MAI

KS8995MAI General Description

When it comes to durability, the KS8995MAI excels with its wide operating temperature range of -40°C to 85°C and ESD protection on all ports. This means that it can withstand harsh industrial environments without compromising on performance. Additionally, its compact 128-pin LQFP package and support for both 3.3V and 1.8V power supplies make it a flexible choice for different system requirements

Features

• Integrated switch with five MACs and five fast Ethernet transceivers fully-compliant to IEEE 802.3u standard Shared memory based switch fabric with fully non blocking configuration 1.4Gbps high-performance memory bandwidth 10BASE-T, 100BASE-TX, and 100BASE-FX modes Dual MII configuration: MII-Switch (MAC or PHY mode MII) and MII-P5 (PHY mode MII). IEEE 802.1q tag-based VLAN (16 VLANs, full-range VID) for DMZ port, WAN/LAN separation or inter VLAN switch links VLAN ID tag/untag options, per-port basis Programmable rate limiting 0Mbps to 100Mbps, ingress and egress port, rate options for high and low priority, per-port basis in 32Kbps increments Flow control or drop packet rate limiting (ingress port) Integrated MIB counters for fully-compliant statistics gathering, 34 MIB counters per port Enable/Disable option for huge frame size up to 1916 bytes per frame IGMP v1/v2 snooping for multicast packet filtering Special tagging mode to send CPU info on ingress packet’s port value SPI slave (complete) and MDIO (MII PHY only) serial management interface for control of register configuration MAC-id based security lock option Control registers configurable on-the-fly (port priority, 802.1p/d/q, AN.) CPU read access to MAC forwarding table entries 802.1d spanning tree protocol Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII Broadcast storm protection with % control – global and per-port basis Optimization for fiber-to-copper media conversion Full-chip hardware power-down support (register configuration not saved) Per-port based software power-save on PHY (idle link detection, register configuration preserved) QoS/CoS packets prioritization supports:− Per port, 802.1p and DiffServ based 802.1p/q tag insertion or removal on a per-port basis (egress) MDC and MDI/O interface support to access the MII PHY control registers (not all control registers) MII local loopback support On-chip 64Kbyte memory for frame buffering (not shared with 1K unicast address table) Wire-speed reception and transmission Integrated look-up engine with dedicated 1K MAC addresses Full duplex IEEE 802.3x and half-duplex back pressure flow control Comprehensive LED support 7-wire SNI support for legacy MAC interface Automatic MDI/MDI-X crossover for plug-and-play Disable automatic MDI/MDI-X option Low power:− Core: 1.8V− Digital I/O: 3.3V− Analog I/O: 3.3V 0.18µm CMOS technology Temperature ranges:− Commercial: 0°C to +70°C− Industrial: –40°C to +85°C Available in 128-pin PQFP package

Specifications