Orders Over
$5000TI LMC6001BIN/NOPB
Operational Amplifiers - Op Amps Ultra Ultra-Low Input Current Amp
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Brands: Texas Instruments
Mfr.Part #: LMC6001BIN/NOPB
Datasheet: LMC6001BIN/NOPB Datasheet (PDF)
Package/Case: 8-PDIP
Product Type: Instrumentation, OP Amps, Buffer Amps
RoHS Status:
Stock Condition: 9,890 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
LMC6001BIN/NOPB General Description
Featuring 100% tested input currents of 25 fA maximum, low operating power, and ESD protection of 2000 V, the LMC6001 device achieves a new industry benchmark for low input current operational amplifiers. By tightly controlling the molding compound, Texas Instruments is able to offer this ultra-low input current in a lower cost molded package.
To avoid long turnon settling times common in other low input current op amps, the LMC6001A is tested three times in the first minute of operation. Even units that meet the 25-fA limit are rejected if they drift.
Because of the ultra-low input current noise of 0.13 fA/√Hz, the LMC6001 can provide almost noiseless amplification of high resistance signal sources. Adding only 1 dB at 100 kΩ, 0.1 dB at 1 MΩ and 0.01 dB or less from 10 MΩ to 2,000 MΩ, the LMC6001 is an almost noiseless amplifier.
The LMC6001 is ideally suited for electrometer applications requiring ultra-low input leakage such as sensitive photodetection transimpedance amplifiers and sensor amplifiers. Because input referred noise is only 22 nV/√Hz, the LMC6001 can achieve higher signal to noise ratio than JFET input type electrometer amplifiers. Other applications of the LMC6001 include long interval integrators, ultra-high input impedance instrumentation amplifiers, and sensitive electrical-field measurement circuits.
Features
- (Maximum Limit, 25°C Unless Otherwise Noted)
- Input Current (100% Tested): 25 fA
- Input Current Over Temperature: 2 pA
- Low Power: 750 µA
- Low VOS: 350 µV
- Low Noise: 22 nV/√Hz at 1 kHz Typical
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
RoHS | Details | Mounting Style | Through Hole |
Package / Case | PDIP-8 | Number of Channels | 1 Channel |
Supply Voltage - Max | 15.5 V | GBP - Gain Bandwidth Product | 1.3 MHz |
Output Current per Channel | 34 mA | SR - Slew Rate | 1.5 V/us |
Vos - Input Offset Voltage | 10 mV | Supply Voltage - Min | 4.5 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Ib - Input Bias Current | 100 fA | Operating Supply Current | 550 uA |
Shutdown | No Shutdown | CMRR - Common Mode Rejection Ratio | 72 dB |
en - Input Voltage Noise Density | 22 nV/sqrt Hz | Series | LMC6001 |
Brand | Texas Instruments | Height | 3.3 mm |
In - Input Noise Current Density | 0.00013 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 9.27 mm | Minimum Dual Supply Voltage | +/- 4.5 V |
Operating Supply Voltage | 5 V, 9 V, 12 V, 15 V | Output Type | Rail-to-Rail |
Product | Operational Amplifiers | Product Type | Op Amps - Operational Amplifiers |
PSRR - Power Supply Rejection Ratio | 66 dB | Factory Pack Quantity | 40 |
Subcategory | Amplifier ICs | Supply Type | Single |
Voltage Gain dB | 122.92 dB | Width | 6.35 mm |
Unit Weight | 0.026879 oz |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
![]() |
Wire Transfer | charge US$30.00 banking fee. |
![]() |
Paypal | charge 4.0% service fee. |
![]() |
Credit Card | charge 3.5% service fee. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products