STM32F050F6P7

STM32F050F6P7 General Description

The STM32F050F6P7 microcontroller unit (MCU) is a powerful and versatile component from STMicroelectronics' STM32F0 series. With its ARM Cortex-M0 core, it delivers impressive 32-bit performance while maintaining low power consumption. Its 32 KB Flash memory and 6 KB RAM, coupled with a CPU frequency of up to 48 MHz, make it ideal for a wide range of embedded applications. The presence of communication interfaces like SPI, I2C, USART, ADC, and PWM channels further enhances its versatility, allowing for seamless integration into various projects

Features

• Core: ARM 32-bit Cortex™-M0 CPU,
• frequency up to 48 MHz
• Memories
• – 16 to 32 Kbytes of Flash memory
• – 4 Kbytes of SRAM with HW parity checking
• CRC calculation unit
• Reset and supply management
• – Voltage range: 2.0 V to 3.6 V
• – Power-on/Power-down reset (POR/PDR)
• – Programmable voltage detector (PVD)
• – Low power modes: Sleep, Stop and
• Standby
• – VBAT supply for RTC and backup registers
• Clock management
• – 4 to 32 MHz crystal oscillator
• – 32 kHz oscillator for RTC with calibration
• – Internal 8 MHz RC with x6 PLL option
• – Internal 40 kHz RC oscillator
• Up to 39 fast I/Os
• – All mappable on external interrupt vectors
• – Up to 25 I/Os with 5 V tolerant capability
• 5-channel DMA controller
• 1 × 12-bit, 1.0 µs ADC (up to 10 channels)
• – Conversion range: 0 to 3.6V
• – Separate analog supply from 2.4 up to
• Up to 9 timers
• – 1 x 16-bit 7-channel advanced-control timer
• for 6 channels PWM output, with deadtime
• generation and emergency stop
• – 1 x 32-bit and 1 x 16-bit timer, with up to 4
• IC/OC, usable for IR control decoding
• – 1 x 16-bit timer, with 2 IC/OC, 1 OCN,
• deadtime generation and emergency stop
• – 1 x 16-bit timer, with IC/OC and OCN,
• deadtime generation, emergency stop and
• modulator gate for IR control
• – 1 x 16-bit timer with 1 IC/OC
• – Independent and system watchdog timers
• – SysTick timer: 24-bit downcounter
• Calendar RTC with alarm and periodic wakeup
• from Stop/Standby
• Communication interfaces
• – 1 x I2C interface; supporting Fast Mode
• Plus (1 Mbit/s) with 20 mA current sink,
• SMBus/PMBus, and wakeup from STOP
• – 1 x USART supporting master synchronous
• SPI and modem control; one with ISO7816
• interface, LIN, IrDA capability auto baud
• rate detection and wakeup feature
• – 1 x SPI (18 Mbit/s) with 4 to 16
• programmable bit frames, with I2S interface
• multiplexed
• Serial wire debug (SWD)
• 96-bit unique ID
• Extended temperature range: -40 to +105°C

Specifications