Orders Over
$5000TI TL054CDR
J-FET Amplifier 4 Circuit 14-SOIC
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Brands: TI
Mfr.Part #: TL054CDR
Datasheet: TL054CDR Datasheet (PDF)
Package/Case: SOIC-14
Product Type: Instrumentation, OP Amps, Buffer Amps
RoHS Status:
Stock Condition: 1,488 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TL054CDR General Description
The TL05x series of JFET-input operational amplifiers offers improved dc and ac characteristics over the TL07x and TL08x families of BiFET operational amplifiers. On-chip Zener trimming of offset voltage yields precision grades as low as 1.5 mV (TL051A) for greater accuracy in dc-coupled applications. Texas Instruments improved BiFET process and optimized designs also yield improved bandwidth and slew rate without increased power consumption. The TL05x devices are pin-compatible with the TL07x and TL08x and can be used to upgrade existing circuits or for optimal performance in new designs.
BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TL05x family was designed to offer higher precision and better ac response than the TL08x, with the low noise floor of the TL07x. Designers requiring significantly faster ac response or ensured lower noise should consider the Excalibur TLE208x and TLE207x families of BiFET operational amplifiers.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required, and loads should be terminated to a virtual-ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.
The TL05x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC-prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to the slew rate and bandwidth requirements, and also the output loading.
![TL054CDR TL054CDR](/files/uploads/product/b/20230110122857596.jpg)
Features
- Direct Upgrades to TL07x and TL08x BiFET Operational Amplifiers
- Faster Slew Rate (20 V/µs Typ) Without Increased Power Consumption
- On-Chip Offset-Voltage Trimming for Improved DC Performance and Precision Grades Are Available (1.5 mV, TL051A)
![TL054CDR TL054CDR](/files/uploads/product/b/20230110123025315.jpg)
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Number of channels | 4 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 30 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 10 | Rail-to-rail | In to V+ |
GBW (typ) (MHz) | 3.3 | Slew rate (typ) (V/µs) | 20 |
Vos (offset voltage at 25°C) (max) (mV) | 4 | Iq per channel (typ) (mA) | 2.7 |
Vn at 1 kHz (typ) (nV√Hz) | 18 | Rating | Catalog |
Operating temperature range (°C) | -40 to 85, 0 to 70 | Offset drift (typ) (µV/°C) | 23 |
Input bias current (max) (pA) | 200 | CMRR (typ) (dB) | 92 |
Iout (typ) (A) | 0.042 | Architecture | FET |
Input common mode headroom (to negative supply) (typ) (V) | 2.7 | Input common mode headroom (to positive supply) (typ) (V) | 0.6 |
Output swing headroom (to negative supply) (typ) (V) | 1.8 |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
![]() |
Wire Transfer | charge US$30.00 banking fee. |
![]() |
Paypal | charge 4.0% service fee. |
![]() |
Credit Card | charge 3.5% service fee. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products