Orders Over
$5000TI TLE2061CP
Operational Amplifiers - Op Amps Low Power JFET
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Brands: Texas Instruments
Mfr.Part #: TLE2061CP
Datasheet: TLE2061CP Datasheet (PDF)
Package/Case: 8-PDIP
Product Type: Instrumentation, OP Amps, Buffer Amps
RoHS Status:
Stock Condition: 9,030 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TLE2061CP General Description
The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise floor than the TL06x and TL03x. On-chip zener trimming of offset voltage yields precision grades for dc-coupled applications. The TL206x devices are pin-compatible with other TI BiFETs; they can be used to double the bandwidth of TL06x and TL03x circuits, or to reduce power consumption of TL05x, TL07x, and TL08x circuits by nearly 90%.
BiFET operational amplifiers offer the inherently-higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption. The TLE206x family features a high-output-drive circuit capable of driving 100- loads at supplies as low as ±5 V. This makes them uniquely suited for driving transformer loads in modems and other applications requiring good ac characteristics, low power, and high output drive.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.
The TLE206x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC- and TLV-prefixes) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements, and output loading. The Texas Instrument TLV2432 and TLV2442 CMOS operational amplifiers are excellent choices to consider.
Features
- 2× Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers
- Low Supply Current . 290 µA/Ch Typ
- On-chip Offset Voltage Trimming for Improved DC Performance
- High Output Drive, Specified into 100- Loads
- Lower Noise Floor Than Earlier Generations of Low-Power BiFETs
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
RoHS | Details | Mounting Style | Through Hole |
Package / Case | PDIP-8 | Number of Channels | 1 Channel |
Supply Voltage - Max | 36 V | GBP - Gain Bandwidth Product | 2 MHz |
Output Current per Channel | 45 mA | SR - Slew Rate | 3.4 V/us |
Vos - Input Offset Voltage | 3.1 mV | Supply Voltage - Min | 7 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Ib - Input Bias Current | 2 nA | Operating Supply Current | 280 uA |
Shutdown | No Shutdown | CMRR - Common Mode Rejection Ratio | 82 dB |
en - Input Voltage Noise Density | 40 nV/sqrt Hz | Series | TLE2061 |
Amplifier Type | Low Power Amplifier | Brand | Texas Instruments |
Dual Supply Voltage | +/- 5 V, +/- 9 V, +/- 12 V, +/- 15 V | Height | 4.57 mm |
In - Input Noise Current Density | 0.001 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 9.81 mm | Maximum Dual Supply Voltage | +/- 18 V |
Minimum Dual Supply Voltage | +/- 3.5 V | Operating Supply Voltage | +/- 3.5 V to +/- 18 V |
Product | Operational Amplifiers | Product Type | Op Amps - Operational Amplifiers |
Factory Pack Quantity | 50 | Subcategory | Amplifier ICs |
Supply Type | Dual | Technology | BiFET |
Vcm - Common Mode Voltage | Negative Rail + 4 V to Positive Rail - 2 V | Voltage Gain dB | 98.06 dB |
Width | 6.35 mm |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
![]() |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
![]() |
Wire Transfer | charge US$30.00 banking fee. |
![]() |
Paypal | charge 4.0% service fee. |
![]() |
Credit Card | charge 3.5% service fee. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products