Images are for reference only See Product Specifications
Orders Over
$5000
TI TLE2071IP
J-FET Amplifier 1 Circuit 8-PDIP
Brands: Texas Instruments
Mfr.Part #: TLE2071IP
Datasheet: TLE2071IP Datasheet (PDF)
Package/Case: 8-PDIP
RoHS Status:
Stock Condition: 5,949 pcs, New Original
Product Type: Instrumentation, OP Amps, Buffer Amps
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*All prices are in USD
| Qty | Unit Price | Ext Price |
|---|---|---|
| 1 | $7.665 | $7.665 |
| 200 | $2.967 | $593.400 |
| 500 | $2.863 | $1431.500 |
| 1000 | $2.812 | $2812.000 |
In Stock: 5,949 PCS
TLE2071IP General Description
The TLE207x series of JFET-input operational amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational amplifiers. Texas Instruments Excalibur process yields a typical noise floor of 11.6 nV/Hz, 17-nV/Hz ensured maximum, offering immediate improvement in noise-sensitive circuits designed using the TL07x. The TLE207x also has wider supply voltage rails, increasing the dynamic signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE207x are pin-compatible with lower performance BiFET operational amplifiers for ease in improving performance in existing designs.
BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TLE207x family of BiFET amplifiers are Texas Instruments highest performance BiFETs, with tighter input offset voltage and ensured maximum noise specifications. Designers requiring less stringent specifications but seeking the improved ac characteristics of the TLE207x should consider the TLE208x operational amplifier family.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.
The TLE207x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC- and TLV-prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements and output loading.
Features
- Direct Upgrades to TL05x, TL07x, and
TL08x BiFET Operational Amplifiers - Greater Than 2× Bandwidth (10 MHz) and
3× Slew Rate (45 V/µs) Than TL07x - Ensured Maximum Noise Floor 17 nV/Hz
- On-Chip Offset Voltage Trimming for
Improved DC Performance - Wider Supply Rails Increase Dynamic
Signal Range to ±19 V
Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
| RoHS | Details | Mounting Style | Through Hole |
| Package / Case | PDIP-8 | Number of Channels | 1 Channel |
| Supply Voltage - Max | 38 V | GBP - Gain Bandwidth Product | 10 MHz |
| Output Current per Channel | 45 mA | SR - Slew Rate | 40 V/us |
| Vos - Input Offset Voltage | 4 mV | Supply Voltage - Min | 4.5 V |
| Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
| Ib - Input Bias Current | 175 pA | Operating Supply Current | 1.6 mA |
| Shutdown | No Shutdown | CMRR - Common Mode Rejection Ratio | 89 dB |
| en - Input Voltage Noise Density | 12 nV/sqrt Hz | Series | TLE2071 |
| Amplifier Type | Wideband Amplifier | Brand | Texas Instruments |
| Dual Supply Voltage | +/- 3 V, +/- 5 V, +/- 9 V | Height | 4.57 mm |
| In - Input Noise Current Density | 0.0028 pA/sqrt Hz | Input Type | Rail-to-Rail |
| Length | 9.81 mm | Maximum Dual Supply Voltage | +/- 19 V |
| Minimum Dual Supply Voltage | +/- 2.25 V | Operating Supply Voltage | 4.5 V to 38 V, +/- 2.25 V to +/- 19 V |
| Product | Operational Amplifiers | Product Type | Op Amps - Operational Amplifiers |
| Factory Pack Quantity | 50 | Subcategory | Amplifier ICs |
| Supply Type | Single, Dual | Technology | BiFET |
| Vcm - Common Mode Voltage | Negative Rail + 4 V to Positive Rail | Voltage Gain dB | 106 dB |
| Width | 6.35 mm |
Shipping
| Shipping Type | Ship Fee | Lead Time | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time：Shipping fee depend on different zone and country.
Payment
| Terms of payment | Hand Fee | |
|---|---|---|
 |
Wire Transfer | charge US$30.00 banking fee. |
 |
Paypal | charge 4.0% service fee. |
 |
Credit Card | charge 3.5% service fee. |
 |
Western Union | charge US.00 banking fee. |
 |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
![Product]( "Product")
Step1 :Product
-
![Vacuum packaging]( "Vacuum packaging")
Step2 :Vacuum packaging
-
![Anti-static bag]( "Anti-static bag")
Step3 :Anti-static bag
-
![Individual packaging]( "Individual packaging")
Step4 :Individual packaging
-
![Packaging boxes]( "Packaging boxes")
Step5 :Packaging boxes
-
![bar-code shipping tag]( "bar-code shipping tag")
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
![Product]( "Product")
We have rich products, can meet your various needs.
-
![quantity]( "quantity")
Minimum order quantity starts from 1pcs.
-
![shipping]( "shipping")
Lowest international shipping fee starts from $0.00
-
![guarantee]( "guarantee")
365 days quality guarantee for all products
